Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
The 230 Volt single phase Kerrick stationary automatic electric powered pressure washer for washdown bays, has a heavy duty, slow revving, 1440 RPM motor, that drives a heavy duty brass pump with ceramic pistons and an unloader valve that is enclosed in a Zinc plated box frame for wall or stack mounted. The photo shows a double-stacked unit, however, the item is sold as a single module, which may be connected together. Gun and high pressure hose and lances can all be chosen to customise the wash down area to the users specific requirements.
• Compact, industrial high pressure washers designed specifically for the
Australian market, including car washes
• Zinc plated box frame for wall or stack mount
• Low speed motor
• Heavy duty brass pump and unloader valve
• Single or double-stacked the units
• Thermal protection valve
• Gun with brass swivel
• Can be wall mounted
• Delay stop and restart
• One year commercial warranty
Pump pressure (bar/psi) – 110 / 1500
Pump speed (RPM) – 1440
Water flow (L/min) – 11
Maximum temperature (°C) – Cold water
Input (V/Hz) – 240 / 50
Pistons – Ceramic
Power consumption (kW) – 2.2
Hose length (m) – 10
Hose type – 3/8 inch two-wire braid
The 230 Volt single phase Kerrick stationary automatic electric powered pressure washer for washdown bays, has a heavy duty, slow revving, 1440 RPM motor, that drives a heavy duty brass pump with ceramic pistons and an unloader valve that is enclosed in a Zinc plated box frame for wall or stack mounted. The photo shows a double-stacked unit, however, the item is sold as a single module, which may be connected together. Gun and high pressure hose and lances can all be chosen to customise the wash down area to the users specific requirements.
• Compact, industrial high pressure washers designed specifically for the
Australian market, including car washes
• Zinc plated box frame for wall or stack mount
• Low speed motor
• Heavy duty brass pump and unloader valve
• Single or double-stacked the units
• Thermal protection valve
• Gun with brass swivel
• Can be wall mounted
• Delay stop and restart
• One year commercial warranty
Pump pressure (bar/psi) – 110 / 1500
Pump speed (RPM) – 1440
Water flow (L/min) – 11
Maximum temperature (°C) – Cold water
Input (V/Hz) – 240 / 50
Pistons – Ceramic
Power consumption (kW) – 2.2
Hose length (m) – 10
Hose type – 3/8 inch two-wire braid
