Maximise Workshop Efficiency with Smart Workspace Solutions
Enhance efficiency with workshop benches, parts washers, floor scrubbers, vacuums & brake lathes in NSW & Australia. Durable, high-performance workspace solutions for all workshops.
Workshop Solutions
NEW PRODUCTS
Description
CP9791C 1/2"(13 mm) PNEUMATIC DRILL | Chicago Pneumatic
Designed for body shops or general maintenance applications such as drilling, honing, reaming and hole sawing, the CP7300 / CP928X / CP978X / CP979X Series offers high comfort with its compositie housing with thermoplastic rubber handle grip, its wings on right & left sides to guide the forefinger and its handle exhaust. This model belongs to theCP7300 / CP928X / CP978X / CP979X Series which is composed of 11 models: 3 x 1/4" drills, 4 x 3/8" drills and 4 x 1/2" drills
Country of origin is TW. Customs tariff is 84671190
CP9791C 1/2"(13 mm) PNEUMATIC DRILL Benefits
Composite housing with thermoplastic rubber handle grip and wings on right & left sides for better operator comfort
Large teasing trigger and progressive valve allowing more control to start holes
Handle exhaust allowing the air to flow away from the operator
Flat back part for better pushing action while drilling and tapping
Description
1" PNEUMATIC IMPACT WRENCH
Designed for tire changing applications, this 1" impact wrench with its high torque of 1,920 ft.lbs / 2,600 Nm is highly recommended.
The pinless closed reinforced rocking dog impact mechanism and metal housing offer high durability.
The CP7782 series includes 3 models: 1" short anvil, 1" long anvil (6" anvil) and 1" long anvil (6" anvil) with spline retainer.
Country of origin is TW.
Customs tariff is 84671190
Benefits
1,920 ft.lbs ( 2,600 Nm) of max torque in reverse position for high productivity
Metal housing and pinless closed reinforced rocking dog impact mechanism for high durability
Power control regulators at the rear of the unit with 3 reverse and 3 forward positions
Integrated protective cover on the clutch housing protects both applications & tool
Low vibration for improved comfort
Description
1/2"PNEUMATIC IMPACT WRENCH
The CP7748 series impact wrench with its torque of 960ft.lbs / 1,300 Nm, twin hammer impact mechanism, and composite housing is powerful and durable and ensures efficient bolting and unbolting when changing wheels and tires on light vehicles. In addition, the new forward/reverse system & power control (ring system) increase operator comfort while also improving functionality. The CP7748 series is composed of 2 models: 1/2" short anvil and 1/2" long anvil (2" anvil).
Country of origin is TW. Customs tariff is 84671190
Benefits
960 ft.lbs / 1,300 Nm of max torque in reverse position for high productivity
Composite housing, twin hammer impact mechanism, hard anodized end plates, and hard chromium aluminum cylinder for high durability
Lightweight (4.65 lbs – 2.11 kg) and compact (8.86 in. / 225 mm long) for improved comfort
One-hand reverse system (Ring system) for better ergonomics
Curved rubber handle to help prevent slipping
Description
CP86200 Chicago Pneumatic Hydraulic Workshop Press
This hydraulic workshop press is ideal for vehicle service workshop professionals. 2 stable V blocks are provided with each press. A moveable cylinder ensures flexibility. Each workshop is equipped with an adjustable workbench with between 5 and 10 positions, according to each model. A large gauge that measures short and metric tons offers easy pressing control.
Chicago pneumatic workshop presses are CE, TUV, and ASME certified. The CP86 series has 4 models ranging from 15 to 50 tons. A protection cage is recommended for safety reasons - not included (see accessories)
The country of origin is CN. Customs tariff is 84629090
CP86200 Chicago Pneumatic Hydraulic Workshop Press Benefits
2 steps stroke system: one for quick approach and a high precision small stroke for fine load tuning
Durable, robust steel frame
2 holes in each foot to fix to the floor ensuring improved stability
2 dismountable steel rods to adjust the bench, with a dedicated winch to allow operators to work alone
FEATURED PRODUCTS
NILFISK | B17 SUPER BENCH | BENCH LATHES PRODUCT DESCRIPTION
witching from resurfacing brake discs to drums takes merely seconds with the new P2 quick change cutting head. Feed direction is automatically changed as you spin and lock down the head with just one lever! The power plant of the B17 is a quiet DC motor which provides smooth operation across a wide range of discs and drums. The B17 is equipped with our most advanced electronics package which tracks lathe usage and provides service reminders! All of that and it's mounted on a mobile tool cabinet to safely store all your necessary adapters and accessories. You just can't beat the B17's quality, precision and innovation from the folks who perfected on-car lathes!
NILFISK | B17 SUPER BENCH | BENCH LATHES PRODUCT FEATURES
Quick-Pivot Cutting Head: Delivers fast, precise rotor resurfacing with minimal setup time
Mobile Tool Cabinet: Provides organised storage and easy movement around the workshop
Quiet DC Power Plant: Ensures smooth, low-noise operation for a better workshop environment
Adapter Kit: Suitable for cars and light trucks, covering a wide range of applications
Accessory Start-Up Kit: Includes essential accessories to begin work immediately
On-Site Assembly & Training: Completed by a local Pro-Cut representative for correct setup and confident operation
Warranty: 2-year parts and labour warranty for peace of mind
Included Documentation & Resources
Technical Manual
Quick Tech Sheet
Safety Manual
Quick Start Guide
Sell Sheet
B17 Accessories Guide
Product Line Brochure
NILFISK | B17 SUPER BENCH | BENCH LATHES PRODUCT SPECIFICATIONS
Max Rotor Thickness: 2.25 in / 57 mm
Max Rotor Face Width: 3.50 in / 90 mm
Max Rotor Diameter: 19.50 in / 495 mm
Max Drum Diameter: 26.40 in / 670 mm
Max Drum Depth: 5.90 in / 150 mm
Rotor Feed Rate: 0–0.06 in/rev · 0–0.17 mm/rev
Brake Type: Rotor and drum
Spindle Speeds: Variable 100 / 140 / 180 RPM
Motor: 750 W
Spindle Bearings: Taper roller
Double Taper Arbor: Yes
NILFISK | SCRUBBER SC450 53 E | MEDIUM WALK-BEHIND SCRUBBER/DRYERS PRODUCT DESCRIPTION
In line with the century old Nilfisk tradition, SC450 combines performance, reliability, productivity and ease of use in a well designed and cost efficient all round scrubber/dryer.
NILFISK | SCRUBBER SC450 53 E | MEDIUM WALK-BEHIND SCRUBBER/DRYERS PRODUCT FEATURES
Low Noise Operation: Enables daytime cleaning with improved comfort and efficiency in noise-sensitive environments.
Durable Polyethylene Tank: Corrosion-proof rotomoulded tank construction ensures long-term durability and reliability.
Automatic Squeegee Release: Squeegee automatically disengages when hitting obstacles, reducing damage and extending equipment lifespan.
Large Recovery Tank: Spacious tank with a removable lid allows quick, easy, and hygienic cleaning.
Fast & Hygienic Operation: Designed to maintain high cleaning standards with minimal downtime.
Protected Electrical Components: Key electrical components are housed in a dedicated waterproof enclosure for enhanced safety and reliability.
NILFISK | SCRUBBER SC450 53 E | MEDIUM WALK-BEHIND SCRUBBER/DRYERS PRODUCT SPECIFICATIONS
Plug Type: EU
Voltage / Frequency: 230 V / 50 Hz
Protection Class (IP): IPX4
Rated Power: 1,650 W
Airflow: 36 L/sec
Sound Pressure Level (1.5 m, ISO 3744): 70 dB(A)
Productivity (Theoretical / Actual): 2,120 / 1,060 m²/h
Handle Vibration Level: < 2.5 m/s²
Scrubbing Width: 530 mm
Max. Climbing Rate: 2%
Water Flow: 0.4–1.6 L/min
Cable Length: 20 m
Solution / Recovery Tank Capacity: 40 / 45 L
Squeegee Width: 760 mm
Brush / Pad Diameter: 530 / 508 mm
Brush Pressure: 34 kg
Brush Speed: 150 RPM
Brush / Pad Speed: 150 RPM
Brush Configuration: 1 disc
Dimensions (L × W × H): 1,174 × 760 × 980 mm
Battery Compartment Size: —
Net Weight: 94 kg
Gross Vehicle Weight (GVW): 135 kg
Description:
Chicago Pneumatic introduced the CPA Series more than a decade ago. And in this period of time a strong reputation of quality and top performance was built. But, apart from this remarkable past, the design and philosophy have evolved to match current customer needs: a beautiful all-in-one, powerful and silent screw compressor. A seamless product in terms of user friendliness, reliability and life duration, which makes this series, the screw compressor for tough and hard working conditions.
Features:
Insulation foam, deflectors and anti-vibration pads assure low noise levels
Easy and fast maintenance enabled by good positioning of service items: belts, oil and filters
ES3000: a unique control unit, specially programmed for energy saving
Designed for continuous duty and very hard working conditions
Compresses, stores and processes air using just 1.5m
Made in Italy
Specifications:
Compressor type: Screw
Noise level: 66dBa
Working pressure: 8bar/116psi
Air delivery: 82cfm
Power: 15kW / 20HP
Phases: 3
Dimensions (L x W x H): 1065mm x 665mm x 1070mm
Weight: 340kg
Warranty: 2 Year Warranty with Chicago Pneumatic
deals of the month
brands you know, service you can trust
A well-organized workshop improves efficiency, safety, and productivity. At TWSA, we supply high-quality workspace solutions, including workshop benches, parts washers, floor scrubbers, vacuums, and brake lathes, designed for industrial and automotive workshops across Australia.
Maximise Workshop Efficiency with Smart Workspace Solutions
Our Range of Workspace Solutions
Heavy-Duty Workshop Benches for Organised Workflows
Industrial Parts Washers & Cleaners for Deep Cleaning
Floor Scrubbers & Vacuums – Keep Your Workshop Spotless
Brake Lathes – Precision Machining for Brake Servicing
Why Invest in Our Workspace Solutions?
✅ Improve Safety & Reduce Workplace Hazards – Smart designs for a safer environment.
✅ High-Performance Equipment at Affordable Prices – More cost-effective than competitors.
✅ Long-Lasting Durability for High-Intensity Environments – Designed for heavy-duty use.
Maximize your workshop's efficiency with high-performance workspace solutions. Contact us today for the best deals!