Workshop Compliance|Maintenance|Equipment Response within one business day | 1300 871 711 | Customer Portal

Equipment / Greasing Equipment & Accessories / Grease Pumps / Graco Check-Mate system, 26:1, floor stand

Graco

Graco Check-Mate system, 26:1, floor stand

Graco Check-Mate system, 26:1, floor stand

The Graco NXT Check-Mate is a heavy-duty grease supply system for large-volume transfer and remote fill, offered from 14:1 through to 68:1 on the NXT 3400 and 6500 air motors. The ratio decides the trade: the low ratios move the most grease, the high ratios hold pressure at the far end of a long run and through a ram. Both floor-stand and ram-mounted systems are built, and the higher ratios also cap the air pressure you are allowed to feed them, so the air supply has to be set deliberately rather than left wide open.

Key features

  • Six ratios: 14:1, 26:1, 29:1, 55:1, 63:1 and 68:1
  • NXT Check-Mate 3400 and 6500 air motors
  • Floor stand and ram-mounted systems
  • Available with or without DataTrak monitoring
  • De-icing exhaust option for cold or high-duty installations
  • Suits bulk grease transfer and remote fill rather than single-point dispensing

Specifications

RatioAir motorMaximum air working pressureMaximum fluid working pressure
14:1Check-Mate 3400 500100 psi (0.7 MPa, 7.0 bar)1400 psi (9.6 MPa, 96.5 bar)
26:1Check-Mate 6500 500100 psi (0.7 MPa, 7.0 bar)2600 psi (18 MPa, 179.2 bar)
29:1Check-Mate 3400 250100 psi (0.7 MPa, 7.0 bar)2900 psi (20 MPa, 200 bar)
55:1Check-Mate 6500 250100 psi (0.7 MPa, 7.0 bar)5500 psi (38 MPa, 380 bar)
63:1Check-Mate 3400 10072 psi (0.5 MPa, 4.9 bar)4500 psi (31 MPa, 310 bar)
68:1Check-Mate 6500 20078 psi (0.54 MPa, 5.38 bar)5300 psi (36.5 MPa, 365.4 bar)

Air inlet 3/4 in and fluid outlet 1 in, as published for the 55:1 pump.

Check-Mate systems are configured to the installation. We confirm the exact build, including DataTrak, de-icing exhaust and ram options, against your system on quotation. Other configurations are available on indent.

Installed and serviced by TWSA

Grease is where a badly matched system shows up fastest, so TWSA sizes the pump against your grease, your container and the number of points before anything is ordered. We install the pump, lines, reels and control handles as one system, commission it and prove every point pulls under load. Scheduled servicing afterwards keeps the air motor, priming piston and seals in condition, which is what stops a slow gun becoming a blown line.

Specification

TWSA part numberT-24E007
DescriptionCheck-Mate system, 26:1, floor stand

Part of the Graco NXT Check-Mate Grease Pump range. Supply, installation and servicing are quoted to suit your site.

Get this quoted for your workshop

No prices on the site, on purpose. The Graco Check-Mate system, 26:1, floor stand is quoted with supply, installation and servicing scoped to your bays and workload.

Building a list? Add several items and send them as one request.

Quote this item on its own Response within one business day, from a technician.

Prefer to talk it through?
1300 871 711

← Back to Grease Pumps

Supported after the sale

We install it, commission it and keep it compliant

Everything TWSA supplies is backed by our own technicians and a documented service record from day one.

Request a Quote Call 1300 871 711
Call 1300 871 711 Get a Quote