COMPLIANCE|MAINTENANCE|EQUIPMENT Response within one business day | 1300 871 711 | Customer Portal

Equipment / Greasing Equipment & Accessories / Grease Pumps / Graco Fire-Ball 425 grease pump, 50:1, 55 kg (120 lb)

Graco

Graco Fire-Ball 425 grease pump, 50:1, 55 kg (120 lb)

Graco Fire-Ball 425 grease pump, 50:1, 55 kg (120 lb)

The Graco Fire-Ball 425 grease pump is the high-pressure end of the Fire-Ball range, built on a 4.25 in (108 mm) air motor and offered in 50:1 and 75:1 ratios. Both ratios reach 7500 psi (517 bar) of fluid pressure; the difference is what they need from your air supply and how much product they move per minute. That is a system decision, so we size it against your grease, your container and the number of points before anything is ordered.

Key features

  • Air-operated grease pump in 50:1 and 75:1 ratios
  • 4.25 in (108 mm) effective diameter air motor with a 4 in (102 mm) stroke
  • 7500 psi (517 bar) maximum fluid working pressure on both ratios
  • Stubby, 55 kg (120 lb) and 180 kg (400 lb) container lengths
  • The 75:1 runs on air pressure as low as 40 psi and no higher than 100 psi
  • Available as a bare pump or in stationary supply, mobile and lube truck packages

Specifications

Specification50:175:1
Ratio50:175:1
Maximum fluid working pressure7500 psi (51.7 MPa, 517 bar)7500 psi (51.7 MPa, 517 bar)
Air pressure operating range40 to 150 psi (3 to 10 bar)40 to 100 psi (3 to 7 bar)
Maximum output0.5 gpm (1.9 lpm)0.33 gpm (1.3 lpm)
Maximum recommended pump speed60 cycles/min60 cycles/min
Air consumptionapprox. 19 cfm at 1 gpm at 70 psiapprox. 26 cfm at 1 gpm at 70 psi
Air motor effective diameter4.25 in (108 mm)4.25 in (108 mm)
Stroke4 in (102 mm)4 in (102 mm)
Air inlet1/2 in NPT(F)1/2 in NPT(F)
Fluid outlet3/8 in NPT3/8 in NPT
Wetted materialsSteel, brass, aluminium, leatherSteel, brass, aluminium, leather

Dimensions

Container lengthHeightWidthMotor diameter
Stubby (239731)32-1/16 in (814 mm)17.5 in (445 mm)6-1/2 in (165.1 mm)
55 kg / 120 lb drum (205394, 239729)41-1/4 in (1048 mm)26-11/16 in (678 mm)6-1/2 in (165.1 mm)
180 kg / 400 lb drum (205395, 239730)48-3/16 in (1224 mm)33-5/8 in (854 mm)6-1/2 in (165.1 mm)

Piston height is 14-9/16 in (369.9 mm). Weight: 205394 34 lb (15 kg), 205395 37 lb (17 kg). Sound pressure level 80.9 dB(A) and sound power level 94.6 dB(A), tested at 100 psi (0.7 MPa, 7 bar) at 15 cycles per minute.

Stocked in Australia. Other configurations are available on indent, quoted with your system.

Installed and serviced by TWSA

Grease is where a badly matched system shows up fastest, so TWSA sizes the pump against your grease, your container and the number of points before anything is ordered. We install the pump, lines, reels and control handles as one system, commission it and prove every point pulls under load. Scheduled servicing afterwards keeps the air motor, priming piston and seals in condition, which is what stops a slow gun becoming a blown line.

Specification

TWSA part numberT-205394
DescriptionFire-Ball 425 grease pump, 50:1, 55 kg (120 lb)

Part of the Graco Fire-Ball 425 Grease Pump range. Supply, installation and servicing are quoted to suit your site.

Get this quoted for your workshop

No prices on the site, on purpose. The Graco Fire-Ball 425 grease pump, 50:1, 55 kg (120 lb) is quoted with supply, installation and servicing scoped to your bays and workload.

Building a list? Add several items and send them as one request.

Quote this item on its own Response within one business day, from a technician.

Prefer to talk it through?
1300 871 711

← Back to Grease Pumps

Supported after the sale

We install it, commission it and keep it compliant

Everything TWSA supplies is backed by our own technicians and a documented service record from day one.

Request a Quote Call 1300 871 711
Call 1300 871 711 Get a Quote