Equipment / Automotive Workshop Equipment / Workbenches & Storage / WB1-2SRB Workbench - with Lower Shelf 2 Drawers Wheels and Stainless Steel Top
TWSA
The WB1 range is our single bay workbench platform. One frame, one footprint, nine ways to fit it out. It is the bench we specify most often in workshop fitouts because it drops into a standing bay without stealing floor space from the vehicle, and because the same frame can be built as a bare assembly bench, a lockable tool station or a mobile bench on wheels depending on what that corner of the workshop actually does.
The WB1 codes are TWSA-configured bench systems. We settled on this range because the benches we were being offered were either light duty retail units that flexed under a press fit, or imported industrial frames with no vice plates and no lockable storage. The WB1 platform fixes both problems in one specification.
The reference configuration is the WB1-SXLDC at 1800 mm long. The top is 3 mm folded steel with a 1.5 mm stainless steel cover sheet, and the frame carries a 1500 kg load capacity. Vice plates are built into the top, so a bench vice bolts to steel that was designed to take it rather than to a laminate skin. Self-levelling feet let the bench sit flat on a slab that has moved, which matters more in an older workshop than most people expect. Working height is available at 850 mm or 950 mm, the stainless cover sheet can be specified in 1.2 mm or 2 mm, and the frame is finished in a choice of seven colours.
Bench capacity is not a number to skim past. General service and diagnostic work rarely loads a bench beyond a few hundred kilograms, but the moment a technician is dressing a brake caliper in a vice, splitting a hub or resting a cylinder head on the top, the bench becomes a working structure. The 1500 kg rating on the WB1 frame exists so that the bench is never the weakest part of that job.
Worktop material is the other decision. A stainless steel cover sheet is the right answer wherever fluids are part of the work: oil, brake fluid, coolant, degreaser and parts wash solvent all wipe off stainless without staining or lifting, and it survives being scraped with a gasket blade. Heavier stainless at 2 mm is worth specifying for a bench that will be struck and pressed on daily. Bare folded steel is the choice for fabrication and welding bays, where spatter and heat would ruin a finished surface anyway. Wooden tops suit electrical and trim work, where a non-conductive surface that will not mark a painted panel matters more than fluid resistance.
For an independent workshop, the common build is one WB1-DC or WB1-SXLDC per two service bays, positioned on the wall between them so two technicians share the vice and the cabinets. Tyre and brake bays do better with the WB1-2SRB, because a bench on wheels can be pulled to the vehicle rather than the parts being carried to the bench. Dealership workshops with allocated technician stations usually specify the WB1-5SHS so each technician has drawer storage they are accountable for.
The 850 mm and 950 mm height options are a genuine ergonomic decision, not a catalogue variation. A 950 mm bench suits standing detail work and reduces stooping for taller technicians. An 850 mm bench is better where the top is used to support weight or where the technician needs to look down into an assembly. If you are ordering more than one bench, we recommend keeping heights consistent within a bay so tops can be used together as one surface.
TWSA plans bench positions alongside hoists, extraction drops, air outlets and fluid reels rather than after them, because a bench in the wrong place blocks a hoist arm or sits under a reel that then drips on it. Send us your bay layout and what each bay does, and we will specify and quote the WB1 configurations to match.
| TWSA part number | WB1-2SRB |
|---|---|
| Description | Lower shelf, two drawers, wheels, stainless steel top |
Part of the TWSA WB1 Workbench Range range. Supply, installation and servicing are quoted to suit your site.
No prices on the site, on purpose. The WB1-2SRB Workbench - with Lower Shelf 2 Drawers Wheels and Stainless Steel Top is quoted with supply, installation and servicing scoped to your bays and workload.
Building a list? Add several items and send them as one request.
Quote this item on its own Response within one business day, from a technician.Prefer to talk it through?
1300 871 711
Everything TWSA supplies is backed by our own technicians and a documented service record from day one.